LoL Orbwalker Settings: Extra Windup, Hold Radius, Last-Hit Priority
Quick verdict: The orbwalker is the engine behind every auto-attack your script throws. Get the settings right and your kiting, farming, and trades feel silky. Get them wrong and you'll cancel autos, miss last hits, and look like a bot. This guide gives you exact values for extra windup, hold radius, last-hit priority, and mode switches.
Orbwalker settings are the difference between a script that feels like a clean extension of your hands and one that stutters, cancels autos, and gets you killed in lane. Most players install a lol script, leave every slider on default, and then wonder why their Jinx rockets fire half a second late or their Vayne tumbles into the enemy backline. The orbwalker is the module that handles auto-attack timing, movement between attacks, and target selection. If it's misconfigured, everything downstream suffers: kiting, last hitting, trades, even your combo execution.
This guide breaks down the four settings that matter most: extra windup, hold radius, last-hit priority, and the lane clear vs harass mode toggle. I'll give you exact values, explain when to change them, and show how they play out in real matchups. If you're new to orbwalking as a concept, start with our orbwalking fundamentals guide and then come back here for the tuning numbers.
What Extra Windup Actually Does (And Why Default Is Too Low)
Extra windup adds a small delay before the orbwalker fires an auto-attack after you issue an attack command. It sounds counterintuitive: why would you want to delay your damage? Because the game's server tick and your ping create a window where an instant attack can be cancelled by your own movement command. If the orbwalker fires the auto too early, the attack animation starts, then your next move command interrupts it, and the attack never lands. You lose damage and look like you're stuttering.
The right extra windup value depends on your ping and your champion's attack windup. On 30-50 ms ping, 20-30 ms extra windup is enough to let the server register the attack before your movement command goes through. On 80-120 ms ping, bump it to 40-60 ms. For melee champions with long windups like Darius or Illaoi, 50-70 ms prevents cancelled autos during trades. In our testing on the current patch, most ADCs feel best at 25-35 ms. Set it too high (over 80 ms) and you'll notice your DPS drop in extended fights because you're effectively attacking slower than the game allows.
One concrete example: playing Caitlyn into a Draven lane. Draven wants to trade autos constantly. If your extra windup is too low, your Caitlyn autos get cancelled when you try to step back after each attack. You end up losing trades you should win because half your damage never goes through. Bump extra windup to 35 ms and suddenly every auto lands, you keep your range advantage, and Draven can't punish your spacing.
Hold Radius: The Setting That Keeps You Alive

Hold radius defines how close an enemy must be before the orbwalker stops moving and starts attacking. If an enemy is outside the radius, the orbwalker prioritizes movement (kiting, repositioning). Inside the radius, it prioritizes auto-attacks. This setting is your primary defense against walking into melee range accidentally, and it's the one most players get wrong.
For ranged champions, set hold radius to roughly your attack range minus 50-80 units. Jinx rocket form has 725 range, so a hold radius of 650-675 keeps you attacking from max range without stepping forward. For melee champions, 80-120 units works because you need to be close to attack anyway. The trap is setting hold radius too high: your champion will stop moving to attack targets that are outside your actual attack range, causing you to stutter-step in place while the enemy closes distance. Too low and you'll keep moving even when you could be attacking, losing DPS.
In a Vayne vs. Leona lane, hold radius matters more than almost anything else. Leona wants to land Zenith Blade and lock you down. If your hold radius is set to 550 (Vayne's attack range), the orbwalker will try to attack Leona when she's at 540 units, which means you're standing still right in her engage range. Set it to 480-500 and you'll keep moving until she's closer, giving you a split-second more to react to her sword. Tune your spacing with our Vayne orbwalker settings guide for champion-specific numbers.
Hold Radius for Melee Champions
Melee champions need a different approach. Set hold radius to 100-120 units for bruisers like Darius or Sett, and 80-100 for assassins like Zed or Talon who rely on abilities more than autos. If you're playing a tank like Ornn, 120-150 is fine because you want to be in the fight anyway. The goal is to avoid the orbwalker dragging you toward minions when you're trying to trade with the enemy champion.
Last-Hit Priority: How to Farm Without Missing CS
Last-hit priority tells the orbwalker to focus on minions that are about to die, ensuring you get the gold. When enabled, the orbwalker calculates the minion's remaining health and your attack damage, then times the auto-attack to land the killing blow. This is huge for farming, but it can backfire if you're not careful.
The setting has two modes: 'safe' and 'aggressive'. Safe mode only last-hits when there's no enemy champion within a certain radius (usually your hold radius plus 100 units). Aggressive mode last-hits regardless, which is risky in lane because you'll walk into poke range to grab a caster minion. My recommendation: use safe mode in lane, aggressive mode in jungle or when you're alone in a side lane. For cannon minions, safe mode sometimes skips them if an enemy is nearby, so you might need to manually last-hit those. That's a small price to pay for not getting hooked by Blitzcrank every time a caster is low.
In a Jinx vs. Caitlyn lane, last-hit priority on safe mode keeps you from stepping into Caitlyn's Q range just to grab a minion. Caitlyn will poke you every time you walk up. Safe mode makes the orbwalker wait until she's out of range or you've pushed her back. You'll miss a few CS in the short term, but you'll stay healthy and scale. For more farming fundamentals, see our farming improvement guide.
Last-Hit Priority for Supports
Supports should generally have last-hit priority disabled. You don't want the orbwalker competing with your ADC for CS. Instead, use the 'support' mode if your script has one, which makes the orbwalker avoid attacking minions unless they're below a certain health threshold (usually 10-15%). If you're playing a damage support like Brand or Zyra, you can enable last-hit priority in aggressive mode after laning phase when you're farming side waves.
Lane Clear vs Harass Mode: When to Toggle Each

Lane clear mode makes the orbwalker attack minions continuously to push the wave. Harass mode makes it prioritize enemy champions when they're in range, even if minions are present. These two modes are mutually exclusive in most scripts, and knowing when to switch is key to controlling wave state and trading effectively.
Lane clear mode is for when you want to shove the wave and reset, or when you're farming jungle camps. Don't leave it on during laning phase unless you're trying to crash a wave for a cheater recall. If you're playing Malzahar and you want to push the wave before your opponent returns, lane clear mode plus your E on the wave will shove it in seconds. But if you leave it on against a freeze, you'll push into the enemy and get ganked. Harass mode is for lane bullies like Renekton or Lucian who want to trade autos every time the enemy steps up. Turn it on when you have a health advantage and want to pressure. Turn it off when you're trying to freeze or when the enemy has a gank coming.
A concrete scenario: you're playing Renekton into a Riven. Riven wants to use her Q combo to trade and dash out. If you have harass mode on, the orbwalker will auto-attack her every time she's in range, which is fine when her abilities are down. But if you leave it on while she has Q and E up, you'll walk into her combo and lose the trade. Toggle harass mode on only after she uses Q on the wave or misses her third Q. That's the kind of timing a lol script can handle if you set it up right, but you still need to make the decision.
Putting It All Together: A Sample Configuration for ADC
Here's a starting point for a standard ADC like Jinx or Ashe on 40-60 ms ping. Extra windup: 30 ms. Hold radius: 600 units (Jinx rocket range is 725, so 600 keeps you at a safe distance). Last-hit priority: safe mode. Lane clear: off. Harass: off until level 6, then on if you have a lead. Humanizer: 20 ms reaction variance, 5% miss chance on skillshots. This setup keeps you farming safely, kiting at max range, and avoiding accidental pushes.
For a hypercarry like Kog'Maw, you might lower extra windup to 20 ms because his attack speed gets so high that any delay feels clunky. Hold radius should be around 550 (his bio-arcane range is 500-600 depending on level). Check our Kog'Maw orbwalker tuning guide for exact numbers. And if you're playing a champion with a built-in attack reset like Vayne's Tumble, you'll want extra windup even lower (10-15 ms) because the reset already adjusts timing.
A well-maintained League of Legends script like Cado gives you granular control over every one of these settings, plus per-champion profiles so you don't have to re-tune every game. That's the difference between a generic orbwalker and one that feels custom-built for your champion pool.
Common Orbwalker Mistakes That Cost You Games
The biggest mistake is leaving extra windup at 0. It feels responsive in the practice tool, but in a real game with ping and server ticks, you'll cancel autos constantly. Another mistake is setting hold radius too high on melee champions, which makes them walk toward enemies they can't attack yet. And don't forget to disable lane clear mode when you're trying to freeze. I've seen players wonder why their wave keeps pushing when they have lane clear on from a previous jungle clear. That's an easy fix.
One more: don't ignore the humanizer. Setting reaction time to 0 ms makes your orbwalker react faster than a human ever could, which is a red flag if anyone reviews your replays. A 15-25 ms variance and a 5-10% miss chance on skillshots keeps you looking natural. For more on staying under the radar, read our safe scripting guide.
FAQ
What is extra windup in a LoL orbwalker?
Extra windup is a small delay added before each auto-attack to prevent your movement commands from cancelling the attack. It compensates for ping and server tick, ensuring your autos actually land. Typical values are 20-40 ms for most champions.
How do I choose between lane clear and harass mode?
Use lane clear when you want to push the wave quickly or clear jungle camps. Use harass mode when you want to prioritize trading auto-attacks with enemy champions. Toggle them off during laning phase unless you have a specific goal like crashing a wave or pressuring a lead.
Why does my orbwalker sometimes miss last hits?
If last-hit priority is on safe mode, the orbwalker may skip a minion if an enemy champion is nearby. You can switch to aggressive mode or manually last-hit cannon minions. Also check your extra windup: too high a value can cause you to attack too late.
What hold radius should I use for ranged champions?
Set hold radius to about 50-80 units below your attack range. For a 550-range champion, 480-500 works well. For 725-range like Jinx rockets, 650-675. This keeps you attacking from max range without stepping forward.